Standard day tank and sub base tank parts
Listed below are parts currently included as standard on Tramont day tanks. The parts on your tank may differ if optional accessories were ordered. |
Part Name |
Spare Part # |
TRS Series day tank |
| System 2000PLUS™ Electronic Control Module |
216000 |
| TRS Float Sensor |
216090 |
| Poly Tank Cover |
215780 |
| 1/3" HP, 115 VAC, 1 Phase, 60 Hz, Carbonator Mount Motor |
214080 |
| 2 GPM, High Lift Gear Pump |
214390 |
| TRS Inspection Plate and Gasket |
215740 |
TRE Series day tank |
| 1/3" HP, 115 VAC, 1 Phase, 60 Hz, Carbonator Mount Motor |
214080 |
| 2" GPM, High Lift Gear Pump |
214390 |
| TRE Standard Float Switch |
216140 |
| Fuel Level Gauge, Standard TRE/TRX |
215890 |
TRX Series day tank |
| TRX Inspection Plate and Gasket |
215720 |
| Fuel Level Gauge, Standard TRE/TRX |
215890 |
| TRX Manual Fill Cap |
216260 |
Commonly ordered options
While not standardly included on day tanks, these items are commonly requested on day tank orders. |
| 1-1/4" Mushroom Cap with Screen |
216280 |
| Appropriately Sized Emergency Vent |
216320 to 216360 |
| Fuel-in-Basin Switch |
216170 |
| Listed below are parts currently included as standard on Tramont sub base tanks. The parts on your tank may differ if optional accessories were ordered. |
Part Name |
Spare Part # |
TSX (Series 1000) sub base tank |
| Note: TSX tanks built prior to July, 1998 utilized Fuel Level Gauge, Magnetic-Type (includes 1.5" adaptor) |
215920 |
Vent/Fill/Alarm Option
TSX and TPX tanks do not standardly include level alarms, fill caps or vents. However, most customers ordering a TSX or TPX tank select the Tramont Vent/Fill/Alarm package that includes the following items: |
| 1-1/4" Mushroom Cap with Screen |
216280 |
| Appropriately Sized Emergency Vent |
216320 to 216360 |
| Raised Lockable Manual Fill Cap |
216270 |
| Low Fuel Level Switch |
216210 |
Side-Mounted Float Switch:
for leak detection in double-wall, open-top diked, closed-top diked and secondary containment only. |
216230 |
TSS (Series 1000) and TPS (Series 400) day tank sub base tanks
Tramont offers sub base tanks with pumps, moors and controllers for pumping applications. Options standardly quoted on TSS/TPS day tank sub base tanks include: |
| System 2000PLUS™ Electronic Control Module |
216000 |
| TRS Float Sensor |
216090 |
| 1/3 HP, 115 VAC, 1 Phase, 60 Hz, Carbonator Mount Motor |
214080 |
| 2 GPM, High Lift Gear Pump, 3/8" NPT Inlet & Discharge |
214390 |
| Critical High, Emergency Shutdown |
216190 |
| 1/2" NPT Solenoid Valve |
214690 |
| 3/4" Fuel Strainer |
215510 |
| Raised Lockable Manual Fuel Cap |
216270 |
Side- Mounted Float Switch:
for leak detection in double-wall, open-top diked, closed-top diked and secondary containment only. |
216230 |
1-1/4" Mushroom Cap with Screen
|
216280 |
| Appropriately Sized Emergency Vent |
216320 to 216360 |
Controls |
Part Name |
Part Description |
Spare Part # |
List Price |
| System 2000PLUS™ ECM and Bracket |
For retrofit of electromechanical ECM. TRS only. |
215990 |
$1,828.00 |
| System 2000PLUS™ ECM |
For single supply pump/motor. TRS/TSS/TPS only |
216000 |
$1,770.00 |
| Duplex System 2000PLUS™ ECM |
For duplex supply pump/motor systems. TRS/TSS/TPS only. |
216010 |
$2,064.00 |
| 12 VDC System 2000PLUS™ ECM |
For single supply pump/motor. Allow 8-10 weeks for delivery. |
216020 |
$2,064.00 |
| 24 VDC System 2000PLUS ECM |
For single supply pump/motor. Allow 8-10 weeks for delivery. |
216030 |
$2,064.00 |
| System 2000PLUS™ Front Panel |
For single supply pump/motor. TRS/TSS/TPS only. |
216040 |
$975.00 |
| System 2000PLUS™ Rear Panel |
For single supply pump/motor. TRS/TSS/TPS only. |
216050 |
$1,032.00 |
| Duplex System 2000PLUS™ Front Panel |
For duplex supply pump/motor. TRS/TSS/TPS only. |
216060 |
$1,005.00 |
| Duplex System 2000PLUS™ Rear Panel |
For duplex supply pump/motor. TRS/TSS/TPS only. |
216070 |
$1,074.00 |
| Level Modification |
Level control chip for System 2000PLUS ECM, modifies standard level settings for pump operation and/or warning signals. Specify levels and warnings and if ECM is single or duplex. Consult factory for older-model 1 amp ECM. |
216080 |
$583.00 |
| Standard TRS Float Sensor |
0-90 Ohms. Specify tank height. |
216090 |
$246.00 |
| 2" x 1-1/2" Bushing for Sender |
Drilled and tapped, screw included. |
108240 |
$91.00 |
| Sub Base Tank Sender Kit |
Replaces twin site sender and magnetic gauge found on older model sub base tanks. |
108250 |
$342.00 |
| 2" NPT Bushing |
Includes (2) 1/2" NPT fittings. |
108310 |
$346.00 |
| Thermostatically Controlled Heater for System 2000PLUS™ ECM |
. |
216120 |
$357.00 |
| Explosion-Proof Enclosure for System 2000PLUS™ ECM |
. |
216130 |
Consult Factory |
| TRE Standard Float Switch |
For pump/motor control. Side-mounted, 1/2 HP rated. |
216140 |
$600.00 |
| Top Mounted Pump/Motor Float Switch |
For pump/motor control. Used with TRE double-wall tanks in outdoor applications. Requires 1/8" threaded hole. Weatherproof cover (215810) may be required to weatherproof tank. |
216150 |
$831.00 |
| Heavy-Duty TRE Float Switch |
Side mounted. For 3/4 and 1 HP, 120 VAC, 1 phase motors. Fits in 2-1/2" NPT. Also available for 1/3 HP motor at 12 or 24 VDC. Specify motor HP and voltage |
216160 |
$900.00 |
Alarms & Alarm Panels |
Part Name |
Part Description (click on the part # to view image, if available) |
Spare Part # |
List Price |
| Fuel-in-Basin Switch, Day Tank |
Day tank only. 50-Watt float switch signals presence of fuel in containment basin. When connected to System 2000PLUS™ ECM, it will deactivate pump/motor and activate relay and LED. Specify basin height or model. |
216170 |
$300.00 |
| Fuel-in-Basin Alarm with Relay |
50-Watt float switch with 10 amp relay and light for remote annunciation of fuel in containment basin. Day tank only. Specify basin height or model. |
216180 |
$611.00 |
| Critical High, Emergency Shutdown |
TRS only. Isolated electrical controls activate high level alarm, stopping pump/motor for safety redundancy. Emergency shutdown overrides System 2000PLUS™ ECM. 3 amp @ 120 VAC contact relay provided for remote annunciation. |
216190 |
$437.00 |
IMPORTANT NOTE:
PLEASE READ BEFORE ORDERING THE FOLLOWING SIX SWITCHES AND ALARMS.
Standard fuel level settings are 50% low, 95% high. Specify if different levels required. Specify if the switch or alarm is for a day tank or sub base tank. Day tanks require a 1/8" threaded hole. Sub base tanks require a 2" NPT fitting.
|
| Dual Fuel Level Switch |
Two 50 watt float switches for remote annunciation of two fuel level conditions. Specify day tank or sub base and tank height. Under 10" high tank won't work. |
216200 |
$350.00 |
| Low Fuel Level Switch |
50 watt float switch for remote annunciation of low fuel level. Specify day tank or sub base and tank height. Also used for top-mount leak detection on sub base tanks. |
216210 |
$219.00 |
| 3. High Fuel Level Switch |
50 watt float switch for remote annunciation of high fuel level. Also used for sub base only top mount leak detection. Specify day tank or sub base and tank height. |
216220 |
$215.00 |
| Low Level Alarm and Relay |
50 watt float switch and heavy duty 10 amp relay with light for remote and local annunciation. Specify day tank or sub base and tank height. |
215680 |
$503.00 |
| High Level Alarm and Relay |
50 watt float switch and heavy duty 10 amp relay with light for remote and local annunciation. Specify day tank or sub base and tank height. |
215690 |
$503.00 |
| Dual Fuel Level Alarm and Relay |
Two 50 watt float switches and heavy duty 10 amp relays with lights for remote and local annunciation. Specify day tank or sub base and tank height. |
215700 |
$917.00 |
| |
| Side Mounted Float Switch, Sub Base |
Sub base tanks only. Fits in 1/2" NPT. Used for leak detection and cut-off switch for immersion heater. |
216230 |
$111.00 |
| Float Switch, Motor Control, 2-Station |
For older model "TR" day tanks. |
216240 |
$221.00 |
| Remote Panel, One Alarm |
8"W x 8"L x 4"D. Wall-mounted, NEM 3R enclosure. One visual and one audible alarm (95dB@30cm), typically used for one of the following functions: Fuel in containment area, low fuel level, critical low fuel level, high fuel level, critical high fuel level. Includes silence switch. Specify voltage: 12 VDC, 24 VDC, 115 VAC |
215570 |
$1,824.00 |
| Remote Panel, Two Alarm |
Same as 215570, but with two visual and two audible alarms. |
215580 |
$2,030.00 |
| Remote Panel, Three Alarm |
Same as 215570, but with three visual and three audible alarms. |
215590 |
$2,292.00 |
| Remote Panel, Four Alarm |
Same as 215570, but with four visual and four audible alarms. |
215600 |
$2,520.00 |
| Wall Mounted Audible Alarm |
UL Listed, 95dB at 10 feet. 120 VAC standard; specify if 12 or 24 VDC required. |
215610 |
$349.00 |
| Weatherproof Alarm Horn |
. |
215620 |
$531.00 |
| IMPORTANT NOTE: The switches listed below are for day tank or sub base tanks. They feature multiple alarms on a single stem. Specify levels, tank height and size NPT switches installed to.
|
| 2-Level Alarm |
For up to 24" Deep Tank |
108261 |
$705.00 |
| 3-Level Alarm |
For up to 24" Deep Tank |
108262 |
$750.00 |
| 4-Level Alarm |
For up to 24" Deep Tank |
108263 |
$790.00 |
| |
| 2-Level Alarm |
For up to 36" Deep Tank |
108264 |
$705.00 |
| 3-Level Alarm |
For up to 36" Deep Tank |
108265 |
$750.00 |
| 4-Level Alarm |
For up to 36" Deep Tank |
108266 |
$790.00 |
| |
| 2-Level Alarm |
For up to 50" Deep Tank |
108267 |
$705.00 |
| 3-Level Alarm |
For up to 50" Deep Tank |
108268 |
$750.00 |
| 4-Level Alarm |
For up to 50" Deep Tank |
108269 |
$790.00 |
Pump/Motor Combinations & Remote Enclosures |
Part Name |
Part Description (click on the part # to view image, if available) |
Spare Part # |
List Price |
| 2 GPM Pump and 1/3 HP Motor |
2 GPM Pump (214390) and 1/3 HP, 115 VAC, 1 Phase, 60 Hz Motor (214080). Standard TRS/TRE pump and motor. |
214490
|
$669.00 |
| 4 GPM Pump and 1/3 HP Motor |
4 GPM Pump (214400) and 1/3 HP, 115 VAC, 1 Phase, 60 Hz Motor, spider mount (214040). |
214500 |
$1,566.00 |
| 7 GPM Pump and 1/3 HP Motor |
7 GPM Pump (2114410) and 1/3 HP, 115 VAC, 1 Phase, 60 Hz Motor, spider mount (214040). |
214510 |
$1,837.00 |
| 7 GPM Pump and 1/2 HP Motor |
7 GPM Pump (214410) and 1/2 HP, 115 VAC, 1 Phase, 60 Hz Motor, spider mount (214160). |
214520 |
$2,194.00 |
| 10 GPM Pump and 1/2 HP Motor |
10 GPM Pump (214420) and 1/2 HP, 115 VAC, 1 Phase, 60 Hz Motor, C face (214140) |
214530 |
$3,072.00 |
| 10 GPM Pump and 3/4 HP Motor |
10 GPM Pump (214420) and 3/4 HP, 115 VAC, 1 Phase, 60 Hz Motor, C Face (214240). Requires Motor Starter (214310) if used with System 2000PLUS™ ECM. |
214540 |
$3,232.00 |
| 19 GPM Pump and 1 HP Motor |
19 GPM Pump (214430) and 1 HP, 115 VAC, 1 Phase, 60 Hz Motor, C Face. Requires Motor Starter (214650) if used with System 2000PLUS™ ECM. |
214551 |
$4,110.00 |
| Pump Set |
2 GPM carbonator-mount pump (214390) and 1/3 HP, 115 VAC, 1 phase, 60 Hz motor (214080) mounted on common base plate with cover. Includes pressure relief valve, inlet cutoff valve with vacuum gauge and discharge cut off valve. Illuminated "Auto-Off-Manual" switch supplied with NEMA 1 enclosure. All parts pre plumbed and wired. |
214560 |
$2,156.00 |
| Duplex Pump Set |
Same as 214560, but two of each component on a common base. |
214570 |
$4,584.00 |
| Remote Enclosure Kit |
12"x 24" common base with standard poly cover for remote mounting of pump/motor. Consult factory if motor is larger than 1/3 HP. |
214580 |
$480.00 |
| Duplex Remote Enclosure Kit |
24" x 24" common base with steel cover for remote mounting of duplex pump/motor. Consult factory if motors are larger than 1/3 HP. |
214590 |
$562.00 |
Motors |
IMPORTANT NOTES:
1. Motors listed include one of three pump mounting faces: carbonator, spider, or C face. The mounting face on the motor must match the mounting face on the pump. If you do not see the motor you need, consult factory.
2. Specify motor voltage if more than one voltage indicated in description.
3. 208-230/460 VAC motors and 3/4 HP and above motors require motor starter if used with System 2000PLUS™ Electronic Control Module, and may require 120 VAC transformer or other accessories. If you are selecting one of these motors and it is not a replacement for an identical unit, consult factory.
4. 60 Hz motors operate at 1725 RPM. 50 Hz motors operate at 1425 RPM, decreasing pump output by 17%. |
Part Name |
Description |
Spare Part # |
List Price |
| 1/3 HP Motors |
| 1/3 HP MOTOR |
1/3 HP, 12 VDC, TENV Motor, C Face |
214010 |
$1,982.00 |
| 1/3 HP MOTOR |
1/3 HP, 24-28 VDC Motor, C Face |
214020 |
$1,908.00 |
| 1/3 HP MOTOR |
1/3 hp, 115/208-230 vac, 1 Phase, 60 Hz ODP Motor, C Face |
214030 |
$840.00 |
| 1/3 HP MOTOR |
1/3 HP, 115/208-230 VAC, 1 Phase, 60 Hz, ODP Motor, Spider Mount |
214040 |
$714.00 |
| 1/3 HP MOTOR |
1/3 HP, 115/208 VAC, 1 Phase, 60 Hz, TEFC Motor, C Face |
214050 |
$1,182.00 |
| 1/3 HP MOTOR |
1/3 HP, 115/208/230 VAC, 1 Phase, 60 Hz, Explosion-Proof Motor, C Face |
214060 |
$1,782.00 |
| 1/3 HP MOTOR |
1/3 hp, 110/220 VAC, 1 Phase, 50 Hz, TEFC Motor, C Face |
214070 |
$1,158.00 |
| 1/3 HP MOTOR |
1/3 HP, 110/220 VAC, 1 Phase, 50/60 Hz, ODP Motor, Carbonator Mount |
214071 |
$614.00 |
| 1/3 HP MOTOR |
1/3 HP, 115 VAC, 1 Phase, 60 Hz, Standard TRS/TRE ODP Motor, Carbonator Mount |
214080 |
$300.00 |
| 1/3 HP MOTOR |
1/3 HP, 208-230/460 VAC, 3 Phase, 50/60 Hz ODP Motor, C Face |
214090 |
$1,086.00 |
| 1/3 HP MOTOR |
1/3 HP, 208-230/460 VAC, 3 Phase, 50/60 Hz TEFC Motor, C Face |
214100 |
$1,008.00 |
| 1/3 HP MOTOR |
1/3 HP, 115 VAC, 3 Phase, 50/60 Hz, Explosion-Proof Motor, C Face |
214110 |
$2,118.00 |
| 1/2 HP Motors |
| 1/2 HP MOTOR |
1/2 HP, 12 VDC TENV Motor, C Face |
214120 |
$2,046.00 |
| 1/2 HP MOTOR |
1/2 HP, 24 HDC TENV Motor, C Face |
214130 |
$1,968.00 |
| 1/2 HP MOTOR |
1/2 HP, 115/208-230 VAC, 1 Phase, 60 Hz, ODP Motor, C Face |
214140 |
$1,326.00 |
| 1/2 HP MOTOR |
1/2 HP, 115/208-230 VAC, 1 Phase, 60 Hz, ODP Motor, Carbonator Mount |
214150 |
$756.00 |
| 1/2 HP MOTOR |
1/2 HP, 115/208-230 VAC, 1 Phase, 60 Hz, ODP Motor, Spider Mount |
214160 |
$1,068.00 |
| 1/2 HP MOTOR |
1/2 HP, 115/208-230 VAC, 1 Phase, 60 Hz, TEFC Motor, C Face |
214170 |
$1,410.00 |
| 1/2 HP MOTOR |
1/2 HP, 115/208-230 VAC, 1 Phase, 60 Hz, Explosion- Proof Motor, C Face |
214180 |
$1,986.00 |
| 1/2 HP MOTOR |
1/2 HP, 110/220 VAC, 1 Phase, 50 Hz, ODP Motor, C Face |
214190 |
$1,494.00 |
| 1/2 HP MOTOR |
1/2 HP, 110/220 VAC, 1 Phase, 50 Hz, TEFC Motor, C Face |
214200 |
$1,536.00 |
| 1/2 HP MOTOR |
1/2 HP, 208-230/460 VAC, 3 Phase, 50/60 Hz, ODP Motor, C Face |
214210 |
$1,182.00 |
| 1/2 HP MOTOR |
1/2 HP, 208-230/460 VAC, 3 Phase, 50/60 Hz, TEFC Motor, C Face |
214220 |
$1,284.00 |
| 1/2 HP MOTOR |
1/2 HP, 208-230/460 VAC, 3 Phase, 50/60 Hz, Explosion-Proof Motor, C Face |
214230 |
$2,238.00 |
| 3/4 HP Motors |
| 3/4 HP MOTOR |
3/4 HP, 115/208-230 Vac, 1 Phase, 60 Hz, ODP Motor, C Face |
214240 |
$1,488.00 |
| 3/4 HP MOTOR |
3/4 HP, 115/208-230 VAC, 1 Phase, 60 Hz, TEFC Motor, C Face |
214250 |
$1,608.00 |
| 3/4 HP MOTOR |
3/4 HP, 115/208-230 VAC, 1 Phase, 60 Hz, Explosion-Proof Motor, C Face |
214260 |
$2,190.00 |
| 3/4 HP MOTOR |
3/4 HP, 110/220 VAC, 1 Phase, 50 Hz, TEFC Motor, C Face |
214270 |
$1,752.00 |
| 3/4 HP MOTOR |
3/4 HP, 208-230/460 VAC, 3 Phase, 50/60 Hz, ODP Motor, C Face |
214280 |
$1,212.00 |
| 3/4 HP MOTOR |
3/4 HP, 208-230/460 VAC, 3 Phase, 50/60 Hz, TEFC Motor, C Face |
214290 |
$1,392.00 |
| 3/4 HP MOTOR |
3/4 HP, 208-230/460 VAC, 3 Phase, 50-/60 Hz, Explosion-Proof Motor, C Face |
214300 |
$2,292.00 |
| 1 HP Motors |
| 1 HP MOTOR |
1 HP, 115/208-230 VAC, 1 Phase, 60 Hz, ODP Motor, C Face |
214310 |
$1,668.00 |
| 1 HP MOTOR |
1 HP, 115/208-230 vac, 1 Phase, 60 Hz, TEFC Motor, C Face |
214320 |
$1,362.00 |
| 1 HP MOTOR |
1 HP, 115/208-230 VAC, 1 Phase, 60 Hz, Explosion-Proof Motor, C Face |
214330 |
$2,496.00 |
| 1 HP MOTOR |
1 HP, 110/220 VAC, 1 Phase, 50 Hz, TEFC Motor, C Face |
214340 |
$1,596.00 |
| 1 HP MOTOR |
1 HP, 208-230/460 VAC, 3 Phase, 50/60 Hz, ODP Motor, C Face |
214350 |
$1,386.00 |
| 1 HP MOTOR |
1 HP, 208-230/460 VAC, 3 Phase, 50/60 Hz, TEFC Motor Face |
214360 |
$1,464.00 |
| 1 HP MOTOR |
1 HP, 208-230/460 VAC, 3 Phase, 50/60 Hz, Explosion-Proof Motor, C Face |
214370 |
$2,394.00 |
Valves |
Part Name |
Part Description |
Spare Part # |
List Price |
| Ball Valve, 3/8" NPT |
. |
108100 |
$84.00 |
| Ball Valve, 1/2" NPT |
. |
108110 |
$84.00 |
| Ball Valve, 3/4" NPT |
. |
108120 |
$94.00 |
| Ball Valve, 1" NPT |
. |
108130 |
$101.00 |
| Check Valve, 3/8" NPT |
. |
108140 |
$143.00 |
| Check Valve, 1/2" NPT |
. |
108150 |
$249.00 |
| Check Valve, 3/4" NPT |
. |
108160 |
$295.00 |
| Check Valve, 1" NPT |
. |
108170 |
$343.00 |
| Fuseable Link Valve, 3/4" NPT |
Closes at 165 degrees F. |
108180 |
$333.00 |
| Fuseable Link Valve, 1" NPT |
Closes at 165 degrees F. |
108190 |
$815.00 |
| Foot Valve, 1-1/2" NPT |
For installation in main tank to maintain prime supply line. Enters 3" NPT. |
108200 |
$312.00 |
| Foot Valve, 1" NPT |
For installation in main or day tank to maintain prime supply line. Enters 2" NPT. Removable dip tube required if used in day tank. |
108210 |
$160.00 |
| Foot Valve, 3/4" NPT |
For installation in main tank to maintain prime supply line. |
108220 |
$143.00 |
| Float Valve, 1/2" NPT, TRX Only |
For gravity fill applications. |
108230 |
$384.00 |
IMPORTANT NOTES ON ORDERING SOLENOID VALVES:
1. Specify voltage where appropriate.
2. A 100 mesh strainer (215510-215530) is required to prevent contamination of the valve and to ensure proper closure. |
| Solenoid Valve, 120 VAC, 3/8" NPT |
Normally closed, 4 GPM max. |
214990 |
$504.00 |
| Solenoid Valve, 120 VAC, 1/2" NPT |
. |
214690 |
$540.00 |
| Solenoid Valve, Manual Override, 120 VAC, 1/2" NPT |
Normally closed, 4 GPM max. |
214920 |
$756.00 |
| Solenoid Valve, DC System, 1/2" NPT |
Specify 12 or 24 VDC. Normally closed, 4 GPM max. |
214770 |
$522.00 |
| Solenoid Valve, 120 VAC, 3/4" NPT |
Normally closed, 10 GPM max. |
214730 |
$606.00 |
| Solenoid Valve, Manual Override, 120 VAC 3/4" NPT |
Normally close, 10 GPM max. |
214950 |
$828.00 |
| Solenoid Valve, DC System, 3/4" NPT |
Specify 12 or 24 VDC. Normally closed, 10 GPM max. |
214740 |
$570.00 |
| Solenoid Valve, 120 VAC, 1" NPT |
Normally closed, 23 GPM max. |
214830 |
$954.00 |
| Solenoid Valve, Manual Override, 120 VAC, 1" NPT |
Normally closed, 23 GPM max. |
214870 |
$1,194.00 |
| Solenoid Valve, DC System, 1" NPT |
Specify 12 or 24 VDC. Normally closed, 23 GPM max. |
214790 |
$1,044.00 |
| Solenoid Valve, 120 VAC, 2" NPT |
Normally open, 85 GPM max. |
214900 |
$2,202.00 |
| Solenoid Valve, DC System, 2" NPT |
Specify 12 or 24 VDC. Normally open, 85 GPM max. |
214910 |
$2,376.00 |
Immersion Heaters |
IMPORTANT NOTE:
Immersion heaters are for replacement of existing units only. If you need to replace the immersion heater cut-off switch, see Side-Mounted Float Switch (216230) |
Part Name |
Part Description |
Spare Part # |
List Price |
| 150 Watt Immersion Heater |
For TRS/E/X-10, 15. 1 phase, 120 VAC |
215040 |
$2,256.00 |
| 300 Watt Immersion Heater |
For TRS/E/X-25. 1 phase, 120 VAC. |
215050 |
$2,256.00 |
| 1000 Watt Immersion Heater |
For TRS/E/X-50 thru 75 and TSX/TPX/TSS/TPS-10 thru 75. 1 phase, 120 VAC. |
215060 |
$2,430.00 |
| 2000 Watt Immersion Heater |
For TRS/E/X-100 thru 200, and TSX/TPX/TSS/TPS-100 THRU 150. 1 PHASE, 120 VAC. |
215070 |
$2,472.00 |
| 2000 Watt Immersion Heater |
For TRS/E/X-100 thru 200. 1 phase, 208 VAC. |
215080 |
$2,472.00 |
| 3000 Watt Immersion Heater |
For TRS/E/X-275 thru 400, and TSX/TPX/TSS/TPS-200 thru 350. 1 phase, 240 VAC. |
215090 |
$2,916.00 |
| 3000 Watt Immersion Heater |
For TRS/EX-275 thru 400. 1 phase, 480 VAC. |
215100 |
$2,916.00 |
| 3500 Watt Immersion Heater |
For TRS/E/X-350 thru 500. 1 phase, 208 VAC |
215110 |
$3,180.00 |
| 4000 Watt Immersion Heater |
For TRS/E/X-450 thru 600, TSX/TPX/TSS/TPS-400 thru 600. 1 phase, 240 VAC. |
215120 |
$3,180.00 |
| 4500 Watt Immersion Heater |
For TRS/E/X-450 thru 600. 1 phase, 208 VAC. |
215130 |
$3,180.00 |
| 4000 Watt Immersion Heater |
For TRS/E/X-450 thru 600. 1 phase, 277 VAC. |
215140 |
$3,180.00 |
| 4000 Watt Immersion Heater |
For TRS/E/X-450 thru 600. 3 phase, 208 VAC. |
215150 |
$3,180.00 |
IMPORTANT NOTE:
Consult factory for contactor box voltages other than 120 VAC or 240 VAC. |
| Contactor Box for Immersion Heater |
120 VAC |
215160 |
$798.00 |
| Contactor Box for Immersion Heater |
240 VAC |
215170 |
$918.00 |
Retrofit Kits |
IMPORTANT NOTE:
Retrofit kits are designed to add capabilities or convert an existing Tramont day tank or sub base tank into a different model of tank. Individual parts included in the kit can be found in their respective sections. Retrofit kits are wired and mounted as appropriate. |
Part Name |
Part Description |
Spare Part # |
List Price |
| Add Reverse Pumping System to TRS |
Includes remote base with poly cover for pump and motor, electrical box and 20 amp motor control relay, 1/3 HP, 1 phase, 60 Hz motor, 2 GPM pump, critical high fuel level shutdown, 3/8" dip tube, 3/8" check valve, inspection plate and gasket. |
215410 |
$2,034.00 |
| Add Duplex Pumping System to TRS |
Includes duplex System 2000PLUS™ electronic control module, one 1/3 HP, 1 phase, 60 Hz motor, one 2 GPM pump, pump running relay, two 3/8" check valves, remote base with poly cover for single pump and motor. |
215420 |
$3,882.00 |
| Convert TRE to TRS |
Includes duplex System2000PLUS™ electronic control module , TRS float sensor, inspection plate and gasket, plug for side-mounted TRE float switch fitting. Specify tank height. |
215430 |
$2,460.00 |
| Convert TRE to Duplex TRS |
Includes duplex System 2000PLUS™ electronic control module and mounting bracket, TRS float sensor, one 1/3 HP, 1 phase, 60 Hz motor, one 2 GPM pump, pump running relay, two 3/8" check valves, remote base with poly cover for single pump and motor. Specify tank height. |
215360 |
$4,182.00 |
| Convert TR to TRS |
Includes System 2000PLUS™ electronic control module and mounting bracket, TRS float sensor, inspection plate and gasket. Specify tank height. |
215380 |
$2,140.00 |
| Convert TSX/TPX to TSS/TPS |
Includes System 2000PLUS™ controller, remote base with poly cover for single pump and motor, 0-90 Ohm twin site sender kit (215950), Magnetic fuel level gauge (215920), 1/3 HP, 115 VAC, 1 phase, 60 Hz Motor, 2 GPM pump and critical high level switch. Tank requires 1 ½” NPT for replacement gauge, 2” NPT for supplied 2” x 1/2” x 1/2” , with 7” dip tube, double tap bushing for tank fill and overflow back to main tank, 1 ¼” – 2” NPT for critical high switch. (Specify fitting size available) (Specify tank height) |
215390 |
$4,140.00 |
| Add Reverse Pump to TSS/TPS |
Includes remote base with poly cover for single pump and motor, 20 amp motor control relay, 1/3 HP, 115 2VAC, 1 phase, 60 Hz motor, 2 GPM pump, critical high level switch, 1/2” NPT check valve, 3/8” NPT dip tube for overflow to be installed in 3/4” NPT fitting. (Consult factory to properly size reverse dip tube) |
215400 |
$1,692.00 |
& Related Links